Bottle Jack Rubber Pad Adapter Protector Car Jacking Tool Pinch Weld Side Lifting Disk 20mm Hole For Most 2 Ton Bottle Jacks

Perfect 👌 👍👍👍

Bottle jack good job

Cheap chinese tat. Hole in it after minimal use, bad material used to make this .

This is one of those useful products that you wish had been widely available in the past. The rubber disk simply sits on top of your trolley jack or bottle jack lifting pad, preventing damaging metal-to-metal contact on the underside of your vehicle. In the past, I have used ice hockey pucks to 'cushion' the tops of jack pads and axle stands - but they tend to split and crack wherever they rest on any projections or seams under the vehicle.... this handy product has a ready-cut pattern of grooves in the top surface, which allow the pad to be fitted along and over pinch-welds without risking splitting the whole pad. There is also a 25mm cut-out on the underside of the pad, which helps it to sit securely on those jacks which have tops of matching size. A very big plus for this product is its current price-point - but my only concern is that the material this pad is constructed does not feel quite as hard as the ice hockey pucks I previously used..... only time will tell whether it will last longer in use.

Thanks

Ideal for my needs.

Worked as expected, safer than metal to metal.

This product is about as simple as they can get. A rubber disc that attached to the top of your bottle jack in order to increase the load area and reduce metal to metal contact. Essential if, like me, you value your car.The rubber seems good, dense and solid and will hopefully hold up to frequent use. I would add that personally I would always look for a flat area on the underside of the car as putting this directly under a vertical edge could perhaps cut into the rubber or cause it to split.I have several bottle jacks and a point to note is that this doesn't fit them all. The top of your jack needs to be 25mm - it might be greater than this if the ram has an added 'cap' already.Pricey for a bit of rubber but well worth the money to protect your car from possible pressure damage by jacking without a pad.

Works well good buy for the price would buy again

ottimo prodotto, robusto, unico neo ho dovuto adattare il foro sottostante al diametro del pistone martinetto.

Although I didn't measure this before ordering for my bottle jack it is strong and good quality. I'll have to modify it to fit my purpose but that's my fault. Easy to use simple design but will give you better grip and more surface area for the lifting point of your bottle jack.

I really wanted to like this product, and actually ordered two. I appreciate being to use my bottle nose jack on my cars with pinch welds. And the patterned lines help with alignment and centering. But I can’t recommend, as they didn’t last beyond one use each.As you can see in the pictures, the jack saddle broke through the rubber, which is a concerning thing to happen as you’re lifting this up.I’ll add back a star if the return process is seamless, but knowing the risk involved in knowing ppl will be underneath this potentially without a jack stand as a lifesaving support, cannot recommend.

Arrived next day with Prime, enabled me to finish a project, and perfect for the job of getting a garbage disposal lifted to mount below sink