HiLetgo 3pcs ESP32 ESP-32D ESP-32 CP2012 USB C 38 Pin WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP

I haven't tested everything yet but overall these seem like good little boards. They're well-made and work with the Arduino IDE. Once I got through a few hiccups I've had no issue programming them. Had no issues connecting to my home WIFI, flashing OTA, driving some addressable LED's, and integrating with a few I2C peripherals.If you're debating getting these vs ESP8266 boards which cost around the same, I'd strongly recommend these over that. Faster clock speeds, dual core, bluetooth, built-in DAC's, and a number of other features make the ESP32 way better than 8266.I double checked and this board is indeed the ESP32-WROOM-32D using the ESP32-D0WD-V3 Rev 301 chip. The built-in blue LED is connected to GPIO2.There are a few minor issues though I'd like to see resolved at some point:Out of the box, you have to hold down the boot button when uploading a new program, in the Arduino IDE it's when it says "connecting...", you can let go once the flashing process begins. However placing a 10uF cap to GND on the "EN-Reset" pin 2 solves this. Supposedly this is actually an issue with Windows USB drivers but I've never had to do that on any other dev board.The pin labels are on the bottom side of the board, making them basically useless. A printout of the pin diagram is included which is better than nothing, but it's definitely not ideal. Very easy to accidentally miscount and connect the wrong pin.

These were my first ESP32 dev boards. No problems is what you want for your first. These delivered.I always check if hiletgo has the item I am looking for. Having a good vendor is one less thing to worry about. Great pricing is icing on the cake.

Imagine: buying 3 dual-processors for $5 each that are each 500 times faster that a $70,000 (1965 prices) mini-computer of the mid 1960s. These boards have USB-C connectors rather than micro-USB. Otherwise, they are indistinguishable.By the way: the ESP-32 is one remarkable chip. In addition to all the I/O and wireless system support, It has builtin floating point and a multiply-add cycle faster than the clock cycle. That makes it ideal for DSP and audio signal processing applications.

I'm mostly writing this review to gather some information here for other folks buying this, so I'm putting this first:This board appears to be identical to the NodeMCU-32S, down to almost every detail of the schematic. You'll find googling information about that board to provide a lot more information than trying to google the model name on this listing.If you're using PlatformIO (which I've so far found to be pretty smooth overall), this is the key stuff specific to this board that you need in your platformio.ini file:platform = espressif32board = nodemcu-32s(So far, I've had everything work great also using `framework = arduino`, which is a lot easier to get off the ground with than the "espidf" framework.)One note: I have found that usually after I upload code to the board and monitor serial output, I immediately get a whole bunch of garbage output at first. Then the output returns to normal. This only seems to happen right after uploading code; if I cycle the power, the serial output looks normal immediately. The garbage is also super variable in quantity. Sometimes I get what looks like kilobytes of garbage, and other times I only get a few bytes. This happens on each of the three boards I bought, and appears to be harmless, but it did cost me half an hour of flipping around to different configurations before I realized that it doesn't seem to hurt anything.---Now my actual review:Overall, this has worked well so far. I've tested:- Building against the Arduino framework- WiFi access (connecting to an existing 2.4 network)- Running multiple threads- Running a simple HTTP serverMy biggest complaint is that hiletgo has almost no information out there about this board aside from a datasheet about the processor itself and a laser print of a pin-out diagram included with the product. As a result, there's been a lot of trial and error getting everything working, and it would have been even harder if I hadn't found random folks on the internet who had already put in a lot of the legwork.

Has newer USB-C connector and it appears to have an updated bootloader as there are more messages printed out during boot. The one thing that set this apart from other vendors is the fact that they included a pinout of the board. Although this information is pretty easy to find for this board, it sure helps to have it without having to search for it. I've bought from this vendor before and have had good luck with their products.

I couldn't find a board manager for this. Thus it would not run the wifiscan exampleThere's almost no documentation on this board on the web, even on the espressif website